Agency Approvals And Compliance Statements; Agency Approvals For Acx2000 And Acx2100 Routers; Compliance Statements For Emc Requirements For Acx2000 And Acx2100; Routers - Juniper ACX2000 Hardware Manual

Related
Documentation

Agency Approvals and Compliance Statements

Agency Approvals for ACX2000 and ACX2100 Routers

Copyright © 2015, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the ACX2000 and ACX2100 Router
Strong sources of electromagnetic interference (EMI) can destroy the signal drivers and
receivers in the network device and conduct power surges over the lines into the
equipment, resulting in an electrical hazard. It is particularly important to provide a properly
grounded and shielded environment and to use electrical surge-suppression devices.
CAUTION: To comply with intrabuilding lightning and surge requirements,
intrabuilding wiring must be shielded, and the shield for the wiring must be
grounded at both ends.
WARNING: The intrabuilding port(s) of the equipment or subassembly is
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding port(s) of the equipment or subassembly MUST NOT be
metallically connected to interfaces that connect to the OSP or its wiring.
These interfaces are designed for use as intrabuilding interfaces only (Type
2 or Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation
from the exposed OSP cabling. The addition of primary protectors is not
sufficient protection in order to connect these interfaces metallically to OSP
wiring.
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks Devices
on page 106
Agency Approvals for ACX2000 and ACX2100 Routers on page 113
Compliance Statements for NEBS for ACX2000 and ACX2100 Routers on page 115

Compliance Statements for EMC Requirements for ACX2000 and ACX2100

Routers on page 115
Compliance Statements for Environmental Requirements for Juniper Networks
Devices on page 116
Compliance Statements for Acoustic Noise for ACX2000 and ACX2100
Routers on page 117
ACX2000 and ACX2100 routers comply with the following standards:
Safety
CAN/CSA-22.2 No. 60950-1 (2007), Safety of Information Technology Equipment
UL 60950-1 Information Technology Equipment - Safety - Part 1: General
Requirements
EN 60950-1 European Norm, Safety of Information Technology Equipment
113