Table of Contents
Advertisement
For the other mode, you will turn on the UMD display.
Note: For VGA or DVI-D input signal, its default mode is OFF and this button does not work.
（14）METER: METER Button
From this button, it can be chosen to switch the display modes of audio meter, which are METER1,
METER2, METER1+METER2 and OFF. Repeatedly press the button, you can cycle the display mode
mentioned above.
Note: For VGA or DVI-D input signal, this button does not work.
（15）METER SIZE: METER SIZE Button
Note: Only when you turn on the audio meter from METER button, press this button, you can switch
the METER SIZE between SMALL and LARGE.
（16）SPK OUT: SPK OUT Button
Press this button to select speaker output from METER1 and METER2. The speaker output will mute
for VGA and DVI-D input.
4.4.4 Menu Configuration Area
（17）MENU: Menu Select Button
When the monitor power-on the very first time, press the Menu button, METER1L menu will firstly
display on the screen. When the submenu automatically disappears, press Menu button again, the menu
which operated last time will display on the screen. Repeatedly press the Menu button, the next
submenu will display on the screen.
The order of submenu is: METER1L,METER1R,METER2L,METER2R,COMPO LEVEL,COLOR
TEMP, UMD CHAR, ASPECT. All of the menus are automatically cleared in about 15 seconds after the
last menu operation.
Note:
Only when the input signal is YPBPR: 480I60, COMPO LEVEL menu is available.
When the input signal is VGA and DVI-D, Only COLOR TEMP menu is available.
（18）UP,DOWN: Up or Down Button
Up/down navigation of selected menu.
（19）ENTER: ENTER Button
When UMD CHAR menu is selected, press this button to select the UMD character position. Not valid
for any other menus.
Menu items descriptions are as follows:
METER1L: Input Audio
1. When the input signal is SDI, the optional audio modes are : NO, EBD1, EBD2, EBD3, EBD4,
EBD5, EBD6, EBD7, EBD8, EBD9, EBD10, EBD11, EBD12, EBD13, EBD14, EBD15, EBD16 ,
AUD1L, AUD1R, AUD2L, AUD2R. Press MENU button to select METER1L menu. You can
select the audio mode mentioned above by pressing the button "UP, DOWN".
2. When the input signal is VIDEO, Y / C, YPBPR, the optional audio modes are: NO, AUD1L,
LM-150 SERIES LCD MONITOR
Operating Manual
—11—
Advertisement
Table of Contents
