Brother PR650e Operation Manual page 58

EMBROIDERING TUTORIAL
The numbers indicate the thread path for each of the numbered needle bars. Be very careful to correctly
thread the needle bars.
1 Place on spool pin 1 the spool of thread with
the color (lime green) specified for needle
bar 1.
• Make sure that the spool stand is opened in
the shape of a V.
• When using small spools of thread, be sure
to place the included spool mat on the
spool pin before placing the spool on the
pin.
• Use spool cap on all spools of thread
shorter than the height of the spool pin.
1 Spool mat
2 Small spool
3 Spool cap
56
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
2 Pass the thread through the number 1 hole
in the thread guide just above the spool, and
then pass the thread through the number 1
hole in the thread guide toward the front of
the machine.
1 Number 1 hole in the thread guide above the
spool
2 Number 1 hole in the thread guide toward the
front of the machine