Brother PR650e Operation Manual page 176

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5 Complete repeated patterns by repeating
2 4
steps through
6 After making the desired changes, touch
.
The pattern editing screen appears again.
Memo
● When there are two or more patterns, all
patterns will be grouped together as one
pattern in the red frame.
● When changing the direction in which the
pattern will be repeated, all of the patterns
in the red frame will automatically be
grouped as one repeating unit. See the
following section on how to repeat one
element of a repeated pattern.
174
.
■ Repeating one element of a repeated pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only
that single element. This function allows you to
design complex repeated patterns.
1 Choose the direction in which the repeated
pattern will be cut.
• Touch to cut horizontally.
• Touch to cut vertically.
The pattern direction indicator will change
depending on the direction selected.
2 Use and
The cut line will move.
to select the cut line.