Using A Frame Pattern To Create Appliqués (2) - Brother PR650e Operation Manual

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
3 Lightly apply fabric glue or spray adhesive to
the back of the appliqué piece that was cut
1
out in step , and then attach the appliqué
piece to the base fabric.
4 Select the satin-stitched frame pattern with
the same shape to embroider the appliqué
3
attached in step .
1 Appliqué
Note
● If the size or sewing position of the
straight-stitched frame pattern is changed,
be sure to change the size or sewing
position of the satin-stitched frame pattern
in the same way.
212
Using a frame pattern to
create appliqués (2)
There is another way of sewing appliqués. With this
method, there is no need to change the fabric in the
embroidery frame. The appliqué can be created by
sewing two frame patterns of the same size and
shape—one sewn with straight stitches and the
other sewn with satin stitches.
1 Select a frame pattern sewn with straight
stitches to embroider onto the base fabric.
2 Place the appliqué fabric over the
embroidery sewn in step
the area surrounded by the stitching is not
larger than the area of the appliqué fabric.
1
. Make sure that