If The Machine Does Not Respond When A Key Is Pressed - Brother PR650e Operation Manual

Embroidery machine
Hide thumbs Also See for PR650e:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
If the machine does not
respond when a key is
pressed
If nothing happens when a key on the screen is
touched (no key can be selected or the keys are
misaligned), adjust the touch panel as described
below.
1
Touch anywhere inside the touch panel, and
turn the machine off, then on again.
• Continue touching the touch panel until
the screen shown below appears.
• The start/stop button is red.
The adjustments screen appears.
2
Use the included touch pen to touch the
center of the numbered crosses on the screen,
from 1 to 5.
+1
+5
+2
AD Value X and AD Value Y numbers
change with the touch of each numbered
cross to show variables.
• If the buzzer sounds when cross number 5
is touched, an error occurred during
setting, and "ERROR" appears on the
screen. Touch the crosses again, starting
from 1 to 5.
CAUTION
Be sure to use the included touch pen
to adjust the touch panel. Do not use a
mechanical pencil, screwdriver or any
other hard or sharp object. Do not
apply pressure to the LCD screen
display, otherwise damage to the
display may result.
After making the necessary touch panel
3
adjustment, "SUCCESS" will show on the
screen.
Note
● If the keys still do not respond, even after
the touch panel is adjusted, or if the touch
panel cannot be adjusted, contact your
nearest authorized dealer.
4
Turn the machine off, and on again.
+4
+3
Troubleshooting 269
7

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents