Making A Call - Polycom SoundPoint IP 300 Series User Manual

Thank you for selecting Slic's ​ V oice Net ​ . This user's guide is intended to cover the basic
functionality of your service and phone. There are many other advance features that ​ V oice Net ​ i s
capable of, so if you don't find what you're looking for in this document, please call us at
877­754­2266 to inquire about additional functionality.
This document uses some basic terminology as follows:
Soft Keys ​ ­ are buttons whose function changes
depending what you are you doing. They use part
of the LCD display to identify their current function.
Feature Keys ​ ­ This refers to fixed, physical
buttons on the phone. Feature Keys are
intended for a single function and are label
as such.
Display Control ​ k eys ­ these
are the four directional
arrows located in the center
the phone. The ✓ in the
middle of the Display Control keys is called the
Select key.
Making a call
Place a Call:
1. Pick up the handset
2. Enter then number you wish to call
3. Press the
Place a speaker Call:
1. Leave the handset in pace
2. Enter then number you wish to call
3. Press the
NOTE: You can switch to Speaker phone at anytime during a call by pressing the
Put a Call on Hold ​ :
1. During a call, press the
2. To resume the call, press press the
Last Number Redial:
1. Lift telephone handset. Press the assigned code (example, *66).
2. The last outgoing phone number is redialed.
Note: Emergency pages will automatically broadcast to your phone at a pre­set volume level regardless of
whether an active call is occurring or the phone is in the ​ D o Not Disturb ​ m ode. Priority pages will
automatically broadcast in a similar manner, but will not override the ​ D o Not Disturb ​ s
feature key
feature key
feature key.
feature key again
877-SLIC-COM
of
feature key.
etting.
2