Sending Pages; Receiving Pages - Polycom VVX 300 User Manual

Polycom VVX 300 and 310 Business Media Phones User's Guide

Sending Pages

By default, group page are sent using Paging Group 1, which is the default group for your phone. You can
change your default paging group to another group, which is described in
Group. If you change your default paging group, you're automatically subscribed to the new default group.
Note that you can't send a Page-mode page during active calls.
To send a page:
1 From Lines view, press and hold Paging.
2 From the Paging Groups List screen, select the paging group to send the page to.
3 To begin a page, press Page.
An alert tone plays before you can begin sending a page.
4 Begin speaking.
5 Press End Page to end sending a page.
Timesaver: Automatically Sending a Page
To automatically send a page to the default paging group, press and hold Paging, and begin talking.

Receiving Pages

To receive a page sent to a particular paging group, you need to be subscribed to that group. To
subscribe to a paging group, see
How you receive a page depends on the priority of the page and whether you're in an active call or your
phone is set to receive a page during an active call.
You can receive pages on the paging groups you're subscribed to as well as Group 24 (Priority pages)
and Group 25 (Emergency pages). If you enabled Do Not Disturb, you can only receive Emergency
pages. Non-emergency pages don't display or play on your phone.
Receiving Pages
If you receive a page and you're not in an active call, the page immediately plays regardless of the paging
priority.
While a page plays, you can do the following:
 Hold the page.
 End the page. This ends the page on your phone only.
 Place a new call.
Polycom, Inc.
Updating Paging Group
Updating the Default Paging
Subscriptions.
Version 5.0.0
58