Changing The Front Fork Seals; The Fork And Its Components - PEUGEOT Kisbee Workshop Manual

MISCELLANEOUS OPERATIONS

Changing the front fork seals

The fork and its components

1. Fork tube cap.
2. Spring.
3. Calibrated hydraulic tube.
4. Expansion stop spring.
5. Dust cover.
6. Retaining clip.
7. Tightness seal.
8. Fork tube.
9. End of compression cone.
10. Hollow shaft.
11. Stanchion assembly screw.
Disassembly
- Suspend or immobilize the machine
securely.
- Remove the front brake caliper from the fork
tube (2 screw).
- Remove the front wheel.
- Remove the front mudguard (4 screw).
- Remove the front upper shield panel. See:
Procedure 6. page 23.
- Before, loosen the fork tube caps (1).
- Unscrew and remove the 2 upper
screws (A) from the fork Tee.
- Unscrew the 2 lower screws (B) from the
fork Tee.
- Remove the fork stanchions.
48
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
5
6
7
10
11
A
1
2
3
4
8
9
B