PEUGEOT Kisbee Workshop Manual page 53

Pre-assembly checks
- Clean all the parts with a degreasing agent:
• Biosane type ref. 754748.
• Or use an ultrasonic cleaning tank.
- Check the condition of the fork tube, there shall be no corrosion or impact marks, and the tube shall
be perfectly straight and clean.
Reassembly
- Fit a new lightly greased lip seal using push
tool P/N 757893 (7).
- Install the retaining ring.
- Install the dust cover.
- Install the expansion stop spring (4).
- Install the calibrated hydraulic tube (3).
- Install the compression stop cone (9) on the
calibrated hydraulic tube.
- Fit the fork sleeve (10) to the slightly oiled
fork tube (8).
- Install the stanchion assembly screw and its
seal (11).
Tightening torque: 25-30 Nm.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
MISCELLANEOUS OPERATIONS
757893
7
8
9
8
10
3
4
11
10
51