PEUGEOT Kisbee Workshop Manual page 62

FUEL SYSTEM
- Check the condition of the needle valve and
the needle valve seat (A).
Removal of the engine speed adjuster screw
and mixture control screw
- Remove the 2 screws from the sheathing
holder plate.
- Turn clockwise the mixture control
screw (15) while counting the number of
turns until it is screwed home.
Do not turn the screw home forcefully.
- Remove the mixture screw and its
spring (17).
When re-fitting, this operation allows
you to put it back to its initial
adjustment position.
60
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
A
17