Changing The Engine Oil - PEUGEOT Django 125 Owner's Manual

CHANGING THE ENGINE OIL

We advise you to go to a registered
dealer for draining.
Oil contains substances which are
harmful to the environment. Your dealer is
equipped to dispose of used oil without
endangering the environment and in
compliance with current standards.
SAE 5W40 Synthetic API
Engine oil
SAE 10W40 Synthetic API
Quantity 0.7 l at oïl change
When the ambient temperature is below 0 °C, use an oil
of viscosity: 5W40
5 W 40
10 W 40
°C
-30 -20 -10 0 10
°F
-22 -4 14 32 60
The engine must be drained when it is warm to allow the
oil to run easier.
• Place the vehicle on its central stand on flat ground.
• Put on protective gloves.
• Remove the cap/oil gauge.
• Remove the drainage cap and its seal (2) and allow the
oil to drip into a recipient.
SL/SJ
or
SL/SJ
• Remove the strainer cap (3) and clean the strainer.
20 30 40
3
68 86 104
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
2
• Put back the drainage cap and strainer cap, fitted with
a new seal.
• Pour the required quantity of oil corresponding to the
manufacturer's standards into the filler hole.
• Start the engine and let it run for a short while.
• Remove the filler cap/gauge and check the oil level.
• Add oil if necessary.
• Check that the oil drain plug is sealed.
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
17/23