Transmission - PEUGEOT Kisbee Workshop Manual

- Remove the air filter.
- Clean inside the air filter box.
Fit a new air filter.
- Remove the inlet silencer drain plug to let
humidity and oil drip out (A).

Transmission

Removal of the primary transmission cover
- Lift the air filter box to reach the transmission
cover (1 screw) (B).
- Remove the transmission sensor (2 screw).
- Remove the transmission cover (9 screw).
Tightening torque: 10 Nm.
- Remove the paper gasket and the two 2
centering pins.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
SERVICE OPERATIONS
A
B
29