Removal Of The Cylinder Head - PEUGEOT Kisbee Workshop Manual

POWER UNIT
- Disconnect the rear brake control cable.
- Suspend the rear of the machine.
- Remove the 2 pins which secure the engine
to the linkrod (10).
Tightening torque: 57±5 Nm.
When re-installing, use a new nut.
- Remove the shock absorber upper
mount (11).
Tightening torque: 43-50 Nm.
- Lift the rear of the machine.
- Remove the power propulsion unit from the
frame.

Removal of the cylinder head

- Remove the inlet pipe and the carburettor.
Tightening torque: 10 Nm.
- Remove the exhaust.
- Remove the cooling volutes. (7 screw).
- Remove the spark plug.
- Removal of the chain tensioner.
- Remove the screw, the O-ring and the
tensioner spring (1).
Tightening torque: 8 Nm.
- Remove the 2 mounting screws (2) from the
tensioner body.
Tightening torque: 10 Nm.
- Remove the chain tensioner and slacken it
by pressing the ratchet tooth (A).
64
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
10
1
2
11
A