Steering System Tightening Method - PEUGEOT Kisbee Workshop Manual

MISCELLANEOUS OPERATIONS

Steering system tightening method

- Using push tool P/N 753726, fit a new upper
cup into the steering tube.
- Using push tool P/N 757990, fit a lower cup
into the steering tube.
- Grease the cup bearing races.
- Install new ball cage bearings (3).
- Fit the fork into the steering column.
- Grease the cup bearing races.
- Install new ball cage bearings (4).
- Install the upper cone (5).
- Install the dust cover (6).
- Fit and tighten the nut (7).
Tightening torque: 38-42 Nm.
- Loosen and re-tighten the nut.
Tightening torque: 15-19 Nm.
46
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
753726
3
7
5
6
4