Replacing The Bearings Of The Steering System; Steering Headset Cups - PEUGEOT Django 125 Workshop Manual

- Remove:
• the lock washer (2).
• The nut (3).
• The rubber washer (4).
• The nut (5).
• The flat washer (6).
• The dust cover (7).
• The upper cone (8).
• Remove the caged ball bearings (9).
- Remove the fork.
Replacing the bearings of the steering
system

Steering headset cups

If the steering head cups are changed, the
cones and ball bearings must also be
changed.
- Using a drift, remove the steering head cups.
- Install new steering head cups using tool
P/N 759788.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
STEERING/FORK
3
5
7
9
759788
2
4
6
8
69