Trunking Calls - Kenwood NX-5200 User Manual

Note:
Telephone calls can be made only in P25 Trunking Operation.
●
MAKING A TELEPHONE CALL
Autodial
o
Autodial allows you to quickly call numbers that have been programmed onto your
transceiver.
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The first entry in the Autodial list appears on the display.
●
2
Press the [J] and [K] keys to select your desired Autodial list number.
3
Press the PTT switch to make the call.
Manual Dialing
o
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
2
Press the [ ] key to enter manual input mode.
3
Enter your desired number.
You can select a digit by using the [J] and [K] keys, and then set the selected digit by
●
pressing the [ ] key. Repeat this process to enter the entire number.
Alternatively, on full key models, you can enter the number directly.
4
Press the PTT switch to make the call.
5
To end the call, press the key programmed as [Clear].
Selecting a Number from the List
o
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
2
Press the [J] and [K] keys to select your desired list number.
3
Press the PTT switch to make the call.
RECEIVING A TELEPHONE CALL
1
When a call is received, "Phone Call" will appear on the display.
2
Press and hold the PTT switch to speak, and release it to receive.
Only one person can speak at a time.
●
3
To end the call, press the key programmed as [Clear].

TRUNKING CALLS

33