Kenwood NX-5200 User Manual page 25

Low Transmit Power <Low>
o
Turns Low Transmit Power on or off. When using a channel programmed with
medium or high power, this allows you to change the output power to low.
Maintenance <Maint>
o
Allows you to display the signal strength and site information on the LCD when
constructing the system or during maintenance.
Menu <Menu>
o
Press this key to select and perform functions using the transceiver Menu.
Medium Transmit Power
o
Turns Medium Transmit Power on or off. When using a channel programmed with
low or high power, this allows you to change the output power to medium.
Mic Sense
o
Allows you to change the microphone sensitivity.
Microphone Type
o
Allows you to select a microphone type that suits the optional external microphone
connected.
Monitor <Moni>
o
Allows you to turn the transceiver signaling off, to listen to all calls that are received
on the channel.
Monitor Momentary <Moni>
o
Press and hold this key to momentarily turn the transceiver signaling off. Releasing
this key turns the transceiver signaling back on. While signaling is off, you can listen
to all calls that are received on the channel.
Operator Selectable Tone <OST>
o
Refer to "Operator Selectable Tone (OST)" {p. 38} .
OST List
o
Allows you to enter OST List mode.
Playback <Play>
o
Refer to "Playback" {p. 55} .
Priority-channel Select <OSP>
o
Allows you to set a channel as a priority channel.
Regroup Request <Regrp>
o
Allows you to send a request to the dispatcher to join the talkgroup set up by the
dispatcher. The channel name for the dynamic regroup channel appears on the
display when the transceiver joins the talkgroup.
25