Trunking Calls - Kenwood NX-5300E2 User Manual

MAKING A TELEPHONE CALL (P25 AND NXDN TRUNKING)
Autodial
o
Autodial allows you to quickly call numbers that have been programmed onto your
transceiver.
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The first entry in the Autodial list appears on the display.
●
2
Press the [J] and [K] keys to select your desired Autodial list number.
3
Press the PTT switch to make the call.
Autodial Programming
o
You can reprogram your Autodial list to add or delete any DTMF Codes.
1
Press the key programmed as [Autodial Programming] to enter Autodial
Programming Mode. Alternatively, press the key programmed as [Menu] to enter
Autodial Programming Mode using the Menu Mode.
The first entry in the Autodial list appears on the display.
●
2
Press the [J] and [K] keys to select your desired list.
3
Press the [
4
Press the [ ] or [ ] key to edit the Autodial list.
5
Press the [ ] or [ ] key to confirm your selection.
6
Press the [
Manual Dialing
o
1
Press the key programmed as [Autodial] to enter Autodial Mode.
Alternatively, press the key programmed as [Menu] to enter Autodial Mode using the
Menu Mode.
The last called unit appears on the display.
●
2
Press the [ ] key to enter manual input mode.
3
Enter your desired number.
You can select a digit by using the [J] and [K] keys, and then set the selected digit by
●
pressing the [ ] key. Repeat this process to enter the entire number.
Alternatively, on full key models, you can enter the number directly.
4
Press the PTT switch to make the call.
5
To end the call, press the key programmed as [Clear].
42

TRUNKING CALLS

] or [#] key to delete the Autodial list.
] key to exit Autodial Programming Mode.