Kenwood NX-5200 User Manual page 55

Playback
You can play back the voice recordings recorded using Auto Recording.
1
Press the key programmed as [Playback] to enter Playback mode.
Alternatively, press the key programmed as [Menu] to enter Playback mode using the
Menu Mode.
The voice recordings are listed on the display.
●
2
Press the [J] and [K] keys to move up and down the list.
3
Press the [ ] key to play back.
After playing back a recording, the transceiver will automatically play the next recording
●
until the last recording on the list is played.
To pause or resume playback, press the [ ] key.
●
To skip to the next or previous recording, press the [H]/ [I] key. Press and hold the key
●
to fast-forward or rewind.
To delete a recording
o
①
Press the [ ] key while the list is displayed.
A confirmation message appears on the display.
●
②
Press the [ ] key to delete.
To delete all recordings
o
①
Press and hold the [
A confirmation message appears on the display.
●
②
Press the [ ] key to delete.
] key while the list is displayed.
55