Basic Operations; Switching Power On/ Off; Adjusting The Volume; Transceiver Password - Kenwood NX-5200 User Manual

SWITCHING POWER ON/ OFF

Turn the Power switch/ Volume control clockwise to switch the transceiver power
ON.
The following screen appears if the Custom Start-up Screen has not been set.
●
Turn the Power switch/ Volume control counterclockwise to switch the transceiver
power OFF.

ADJUSTING THE VOLUME

Rotate the Power switch/ Volume control to adjust the volume.
Rotate clockwise to increase the volume and counterclockwise to decrease the
volume.

TRANSCEIVER PASSWORD

If the transceiver is protected, "Input Password" will appear on the display when the
power is turned on. To unlock the transceiver, enter the correct password.
1
Press the key programmed as [Transceiver Password] to enter Transceiver
Password Mode.
Alternatively, press the key programmed as [Menu] to enter Transceiver Password Mode
using the Menu Mode.

BASIC OPERATIONS

3