Kenwood NX-5200 User Manual page 24

High Transmit Power <High>
o
Turns High Transmit Power on or off. When using a channel programmed with low
or medium power, this allows you to change the output power to high.
Home Channel <Home>
o
Press this key to jump to your home zone and channel (pre-programmed by your
dealer). If activated by your dealer, you can set your own Home Channel by selecting
your desired zone and channel using Home Channel Select.
Home Channel Select
o
Allows you to set the currently selected channel to Home Channel.
Individual <Indcal>
o
Refer to "Making Individual Calls" {p. 6} {p. 7} .
Individual + Short Message <Ind+SD>
o
Allows you to specify a Unit ID to send short messages.
Individual + Status <Ind+ST>
o
Allows you to specify a Unit ID to send status messages.
IP Address
o
Displays the IP address.
Key Delete <KeyDel>
o
Allows you to delete the Encryption key. Refer to "DELETING THE ENCRYPTION
KEY" {p. 37} .
Key Lock <KeyLck>
o
Press this key to lock the transceiver keys. Press the key again to unlock the keys.
The PTT switch, Selector and Lever switch still function normally, and the following
functions can still be operated: Backlight, Battery Status, Call Response, Clear,
Emergency, Function, Key Lock, LCD Brightness, Monitor, Monitor Momentary,
Squelch Off, Squelch Off Momentary and Zeroize.
Keyset <Keyset>
o
Allows you to change the active Keyset stored in a Secure Cryptographic Module
(SCM).
LCD Brightness <Bright>
o
Allows you to adjust the brightness of the LCD backlight depending on the
surrounding lighting conditions.
Lone Worker <LoneWk>
o
Enables or disables Lone Worker function.
24