Kenwood NX-5200 User Manual page 22

Channel Select
o
Turn the Selector knob clockwise to increase the channel number and
counterclockwise to decrease it.
Channel Up <CH+>
o
Press this key to increase the channel number. {p. 4}
Clear <Clear>
o
Press this key to end a call or cancel a data transmission.
Clock <Clock>
o
Refer to "CLOCK" {p. 39} .
Clock Adjustment <ClkAdj>
o
Allows you to set the clock. Refer to "CLOCK" {p. 39} .
Color Scheme
o
Allows you to change the color scheme of the LCD. Refer to "COLOR
SCHEME" {p. 40} .
CW Message <CW_Msg>
o
Press this key to send the CW message.
Direct Channel 1 ~ 5 <DR1 ~ DR5>
o
Press one of these keys to jump to a frequently used zone and channel (pre-
programmed by your dealer). If activated by your dealer, you can set your own Direct
Channels by selecting your desired zone and channel using Direct Channel 1 ~ 5
Select.
Direct Channel 1 ~ 5 Select
o
Allows you to set the currently selected zone and channel as the Direct Channel 1 ~
5.
Display Format <Disp>
o
Allows you to switch the display between the zone-channel number and the channel
name.
Emergency
o
Refer to "EMERGENCY CALLS" {p. 35} .
Eject SD Card <Eject>
o
Allows you to eject the microSD card.
External Speaker <Spkr>
o
Switches the speaker from the transceiver's built-in speaker to an optional external
speaker.
22