Ricoh SP 311SFNw Getting Started Manual page 17

Setting
SSID The available access point is displayed. To see additional access points, click
Communication
Mode
Ad Hoc Channel Please see note on
Authentication Select authentication method:
Encryption Select encryption method based on chosen Authentication method.
WPA Passphrase If [WEP] is selected for Encryption method, enter enabled fields. If [WPA2-PSK]
WEP Key Length Select 64 bits or 128 bits for the length of the WEP encryption key.
WEP Transmit
Key ID
WEP Key Format Select a format for entering the WEP key.
WEP Key Enter the WEP key. The number and type of characters you can enter vary
6. When finished, click [OK] to save changes.
7. Close web browser.
8. Disconnect Ethernet cable.
9. Turn printer power switch Off. Wait a moment, and turn On.
10. Next, install Network Printer/Scanner Drivers. See
Note:
For further information on Web Image Monitor, please refer to the User Guide, p171.
•
RICOH SP 311SFNw B&W Multifunction Laser Printer
[Scan List].
If necessary, select [Infrastructure].
page
Open System
•
Shared Key
•
WPA2-PSK
•
Mixed Mode WPA/WPA2
•
Open System: Choose [None] or [WEP]
•
Shared Key: [WEP] only
•
WPA2-PSK: Choose [CCMP (AES)] or [TKIP/EAS]
•
Mixed Mode WPA/WPA2: Choose [CCMP (AES)] or [TKIP/EAS]
•
or [Mixed Mode WPA/WPS2] is selected for Authentication, enter enabled
fields.
Select an ID number to identify each WEP key in case multiple WEP connections
are configured.
depending on the length and format selected for the key, as follows:
WEP key length: [64bits], Format: [Hexadecimal]
•
WEP key max length: 10 characters (0-9, A-F, a-f)
WEP key length: [64bits], Format: [ASCII]
•
WEP key max length: 5 characters (ASCII characters)
WEP key length: [128bits], Format: [Hexadecimal]
•
WEP key max length: 26 characters (0-9, A-F, a-f)
WEP key length: [128bits], Format: [ASCII]
•
WEP key max length: 13 characters (ASCII characters)
Description
14.
3.2 Network Quick
Getting Started Guide
Install.
17