Add New Port - Ricoh SP 311SFNw Getting Started Manual

Appendix
D
creation, the steps for manually adding a port are outlined below.
Before proceeding, please check the following:
Printer power switch is On.
•
Network is connected and configured.
•
Printer's IP address is available. If necessary, see
•
1. Click [Start]  [Devices and Printers].
2. Right-click [RICOH SP 311SFNw] icon.
3. Select [Printer properties].
4. Select [Ports] tab.
5. Click [Add Port...].
RICOH SP 311SFNw B&W Multifunction Laser Printer

Add New Port

If you would like to bypass the install wizard and have more control over printer port
Appendix B: Print Configuration Report
Getting Started Guide
.
42