Wireless Connection - Ricoh SP 311SFNw Getting Started Manual

2.2.2 Wireless Connection

There are three setup methods used to wirelessly network the printer to your computer, using a Wi-Fi
router – two Easy Setup methods and one Manual Setup method. Which method you use depends on the
router being used, specifically, whether or not it has a Wi-Fi Protected Setup™ (WPS) button, a feature
that simplifies configuration.
Easy Setup:
PBC (WPS) Method: The Push Button Connect (PBC) method is recommended,
•
as it enables fast setup when using a router that supports WPS.
PIN Method: If your router supports WPS, but does not have a dedicated WPS
•
button, use this method.
Manual Setup:
Manual Method: If your router does not support WPS, follow the Manual Method instructions.
•
Important:
If using the PIN Method or Manual Method, you will need information about your Wi-Fi router (listed
•
below). During configuration, this information will be necessary to enable the printer to
communicate with your router. If you do not have this information available, please ask your Wi-Fi
installer, corporate Help Desk or router manufacturer before proceeding.
SSID (e.g., NETGEAR30)
−
Security Option (e.g., WPA2)
−
Network Key / Passphrase (e.g., WPA2 password)
−
To access your router's web page, you must have login credentials
•
(username and password).
RICOH SP 311SFNw B&W Multifunction Laser Printer
Getting Started Guide
Sample Router Web Page
10