Changing The Base - Gigaset C530 ip User Manual

Registering other handsets
You can register other Gigaset handsets and handsets for other devices with GAP functionality
as follows:
¤
On the handset:
On the base station:
¢
( page 3).
De-registering handsets
Ï
You can de-register any other registered handset from any registered Gigaset C530H handset.
v
¤ ¤ q Registration
you wish to deregister.
System PIN something other than 0000:
Locating a handset, finding the phone's IP address ("paging")
You can locate your handset using the base.
¤
Briefly press the Registration/paging key on the base (
All handsets will ring at the same time ("paging"), even if the ringtones are switched off.
The current (local) IP address for the base appears in the handset
displays.
Ending the search
¤
Briefly press the Registration/paging key on the base
¢
( page 3).
¤
Or: Press the Talk key
¤
Or: Press the display key Silence on the handset.
¤
Or: Do not press any key on the base or handset.
After approx. 30 seconds, the paging call will end automatically.
Notes
u
An incoming external call will not interrupt the paging process.
u
If there are already two internal connections between the handsets,then paging is not pos-
sible.
u
A paging call is also signalled acoustically on handsets where the ringtone is permanently
¢
deactivated (

Changing the base

If your handset is registered to more than one base, you can set it to a particular base or to the
Ï
base that has the best reception (Best Base).
v
¤ ¤ q Registration
bases or select Best Base.
Start registration as described in its operating instructions.
¤
Press and hold (approx. 3 sec.) the registration/paging key on the base
¤ ¤ q De-register Handset
OK
¤
OK (The handset you are currently using is indicated by
c
on the handset.
page 50).
¤ ¤ q Select Base
OK
¤
Select
¤
Enter current system PIN.
¢
¤
OK
Multiple handsets
s
¤ ¤
OK Select the handset
¤ ¤
OK Yes
page 3).
Ø
å
Paging
IP: 192.168.1.2
s
¤
Select one of the registered
f
.)
Ú
Silence
81