Configuring Settings For The Next Call - Gigaset C530 ip User Manual

Special settings for calls via VoIP
Activating/deactivating call transfer – ECT (Explicit Call Transfer)
If the Transfer (ECT) function is activated, you can connect two external callers on a VoIP
connection with each other by pressing the End call key
v Ç
¤
Select Services
Note
You can use the Web configurator to change further settings for the call transfer on a VoIP
¢
connection ( page 125).

Configuring settings for the next call

Activating "anonymous calling" for the next call
You can withhold your phone number for the next call (CLIR = Calling Line Identification
Restriction).
v Ç
¤
Select Services
¤
Enter the number or copy from the phonebook.
The number is dialled.
Withhold your number for all calls,
Configuring settings during an external call
Please note
For VoIP telephony, the services described below are only available if parallel IP connections
are permitted.
Initiating ringback when busy/no answer (fixed line network)
Note
A display key/menu function for activating ringback only appears if the exchange supports
this feature.
If the person you are calling does not answer or their line is busy, you can initiate ringback.
Ringback when busy: The ringback takes place as soon as the participant in question terminates
the current call.
Ringback when the call is not answered: The ringback takes place as soon as the participant in
question has made a call.
Using provider-specific functions (network services)
¤ ¤ q Transfer (ECT)
OK
¤ ¤ q Next Call Anonym.
OK
¢
page 38.
a
.
³
¤
Change ( = activated).
¤
OK
c
¤
Dial /
41