Renovator Multi-Tool Safety And Operating Manual page 13

permanent respiratory problems or other injury.
Always use approved respiratory protection appropriate
for dust exposure according to your national safety
organisations.
Direct dust particles away from your face and body.
EXTENSION CORDS
ALWAYS USE PROPER EXTENSION CORDS. Make sure
that any extension cord used are in good condition.
We recommend that power to the tool always be supplied
via a residual current device with a rated residual current
of 30 mA or less.
DOUBLE INSULATION
The Renovator is double insulated. This means that the
outer metal parts are electrically insulated from the main
power supply. This makes it unnecessary for the tool to be
grounded. Insulation barriers between the electrical and
mechanical components create the double insulation.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
IMPORTANT NOTE
Ensure the voltage matches the power supply given on the
rating label. The Renovator is fitted with a two core power
cord and plug.
Remove the power cord from the power socket before any
servicing or adjustments are carried out on the unit.
To reduce the risk of injury, the operator must firstly read and
understand the Safety and Operating Manual.
TECHNICAL DATA
Rated: Voltage 230-240V
Rated Frequency: 50Hz
Power: 250Watts
Oscillations Speed: 8500-
21000opm
Oscillations Angle: 2.80 angle
Protection Class: Double
Insulation
Weight: 1.5KG
13