Initial Setup - Bayer HealthCare Contour Next Link 2.4 User Manual

"Talks" to Your MiniMed 640G Insulin Pump
12:00
BG
Display
mmol/L
Screen
Active Insulin 1.5 U
Bolus Basal
Up
Menu
Select
Right
Down
Left
Notification Light
Back
Meter Overview
Turning the Meter On or Off
• Press and hold the top Menu button to turn the meter on or off.
• Insert a test strip to turn the meter on.
• Meter turns off after 3 minutes of inactivity.
Using the Top Menu Button
The top Menu button has three functions:
• To turn the meter on/off, press and hold the top Menu button.
• To go back one screen from most screens, press the top Menu button once.
• To turn on/off the test strip port light, quickly press the top Menu button twice.
®
4
84647013_CntrNextLINK2_4_UG_EN_FpBp_v3.indd 4-5 84647013_CntrNextLINK2_4_UG_EN_FpBp_v3.indd 4-5
Your C ® N LINK 2.4 meter can
ONTOUR EXT
automatically send your blood glucose result
or a bolus directly to your MiniMed insulin
pump, if your meter and pump are linked. This
eliminates the need to manually enter a bolus
or your blood glucose result into your insulin
pump. Up to 3 C N LINK 2.4 meters
ONTOUR EXT
can be connected to your MiniMed insulin
pump. To use the meter link feature, your
C N LINK 2.4 meter and MiniMed insulin
ONTOUR EXT
pump must be within 1.83 meters (6 feet) of each
other. If you are not using the meter link feature,
you may want to set the Send option to Never
on your C N LINK 2.4 meter to save
ONTOUR EXT
battery power.
Using the Selection/Scrolling Buttons
L Button
OK Button
OK
M Button
• The three buttons next to the screen allow you to make your selection by pressing the
button next to your choice.
• Scroll up or down for additional choices when the L or M arrows appear on the meter
screen.
• When your choice is highlighted, make a selection by pressing OK.
NOTE: Press and hold the L or M button to scroll through the list faster.
Using the Main Menu
MENU
Bolus
OK
Logbook
Trends
Setup
The Main Menu has four choices: Bolus, Logbook, Trends and Setup. Press the L or M
button to scroll to your desired selection. When your choice is highlighted, press OK.
CAUTION: Unplug meter from charging source before beginning Setup.

Initial Setup

1. Before use, fully charge your meter. See
page iv.
Turn On
2. Press and hold the top Menu
button until the meter turns on.
After a welcome screen, you see
the Language choice screen.
5
3/18/13 8:04 AM 3/18/13 8:04 AM