Setup For Basic (L-1) And Advanced (L-2) Modes - Bayer HealthCare Contour Plus User Manual

Setting the Sound
26
The flashing bell symbol will
now appear on the display
along with the word .
This option controls whether
you want to hear the beep
sound during testing.
To turn the beep sound off
during testing, press ▲ or ▼
to display .
Press M to set.
After setting the sound,
will flash. To keep your meter
in Basic Mode, press M to
set. To change your meter
to Advanced Mode, press ▲
or ▼ to change to
, and
press M to set.
If you are using Basic Mode
(L-1 will appear on your
display), you have completed
your meter setup.
Setup for Basic (L-1) and
Advanced (L-2) Modes
Your new C ® P meter is pre-set for the Basic
ONTOUR LUS
Mode and offers the same easy test procedure in either
the Basic or Advanced Mode.
BASIC MODE (L-1)
• 7 day HI and LO summary
• 14 day average
• 480 test result memory
Your meter is pre-set to Basic
Mode. If you have set your
meter to the Advanced Mode,
and want to return to Basic
Mode:
1. Press M to turn your meter on.
Wait to see the flashing test
strip.
2. Press and hold ▲ or ▼ for
3 seconds.
3. L-2 will flash.
4. Press ▲ or ▼ to change
to L-1.
5. Press M to set.
ADVANCED MODE (L-2)
• 7 day HI and LO summary
• 7, 14, and 30 day averages
• 480 test result memory
• Pre- and post-meal markers
• 30 day pre- and post-meal
averages
• Selectable post-meal
reminders 2,5; 2,0; 1,5;
1,0 hours.
• Personal HI and LO test
settings
To set your meter to
Advanced Mode, and take
advantage of meal markers
and other functions available
to you:
1. Press M to turn your meter on.
Wait to see the flashing test
strip.
2. Press and hold ▲ or ▼ for
3 seconds.
3. L-1 will flash.
4. Press ▲ or ▼ to change
to L-2.
5. Press M to set.
27