(Cruise) Switch; Res/Set Switch; (Following Distance Setting) Switch - Subaru EyeSight Owner's Manual

About EyeSight
■

(CRUISE) switch

• Switches cruise control
• When this switch is pressed "
multi information display. This indicates that the main cruise control is turned on.
⇒
Refer to pages 39 and 68.
• Can be used to cancel the cruise control.
⇒
Refer to pages 47 and 73.
* Adaptive Cruise Control and Conventional Cruise Control

■ RES/SET switch

●
SET/-
• Can be used to set cruise control
• Can be used to reduce the set vehicle speed (when cruise control
⇒
Refer to pages 40 and 44 (for Adaptive Cruise Control).
⇒
Refer to pages 70 and 72 (for Conventional Cruise Control).
●
RES/+
• After cruise control
function at the vehicle speed that was previously set.
• Can be used to increase set vehicle speed (when cruise control
⇒
Refer to pages 43 and 50 (for Adaptive Cruise Control).
⇒
Refer to page 76 (for Conventional Cruise Control).
* Adaptive Cruise Control and Conventional Cruise Control
■

(Following distance setting) switch

• Can be used to switch the set following distance in 3 stages: (only when Adaptive Cruise
Control is on).
⇒
Refer to page 46.
• When the
seconds or longer to select Adaptive Cruise Control or Conventional Cruise Control.
■
switch/
These are used in the following situations.
• When switching the screen displayed on the meter display.
• When changing the Warning Volume settings, etc.
⇒
Refer to page 82.
18
*
on/off.
" or "
*
.
*
is canceled, this switch can be used to resume the cruise control
(CRUISE) switch is on, press and hold this switch for approximately 2
switch
" appears on the EyeSight display area in the
*
*
is currently set).
is currently set).