Symbol MC3000 User Manual page 132

9-4 MC3000 Integrator Guide
Text Box/Button
Please scan all of the bar codes... This text box displays the status of a scanned bar code.
Bar codes left to scan...
About
Reset
Exit
Table 9-1. Rapid Deployment Window
- Waiting indicates the device is ready to scan a bar code.
- OK indicates the device successfully scanned a bar code. (The Indicator LED bar
on the mobile computer turns green and a beep sounds).
If there are no bar codes left to scan, the Rapid Deployment Configuring window
displays, see Figure 9-3.
This text box displays a list of any remaining bar codes to scan (1-D bar codes
only). When all required bar codes are scanned successfully, the Rapid
Deployment Configuring window displays, see
Tap About to display the Rapid Deployment Client Info window.
Tap Reset to remove any previously scanned data.
Tap Exit to close the application. A confirmation window displays:
Tap Yes to exit or No to return to the Rapid Deployment window.
Note: If the application is exited prior to scanning all required bar codes, any
scanned data collected up to that point is lost.
Description
Figure 9-3.