Symbol MC3000 User Manual page 112

7-6 MC3000 Integrator Guide
5. The encryption settings available (with the Ad Hoc network selected) are Disabled and WEP. Tap WEP encryption and select
an appropriate Authentication: type; Open, Shared or WPA-PSK. See
If the Disabled encryption setting is selected, there are no Authentication: types available. See
of the authentication values available for each of the encryption type selections.
Figure 7-6. Wireless Properties, Ad Hoc Network Encryption Selection
Authentication
Open
Shared
WPA
WPA-PSK
WLAN123
Table 7-3. Authentication Selections
Use the Open option when no authentication is needed over the network. Data
packet encryption is still available when no authentication is selected.
Will authenticate the user based on a network key (not recommended).
Select this option for the client adapter to use Wireless Protected Access (WPA).
EAP Type must be selected with this option.
Select this option to use Wireless Protected Access (WPA) via pre-shared key
(PSK).
Table 7-4. Authentication/Encryption Selection Restrictions
Authentication
Type Disabled
Open Available*
Shared Available*
WPA Not Available
WPA-PSK Not Available
* Not available with Ad Hoc networks.
Table 7-3 for a description of the authentication types.
WLAN123
Description
Encryption
WEP TKIP
Available Not Available
Available Not Available
Available Available
Available Available
Table 7-4 for a description
WLAN123