Main Battery Removal - Symbol MC3000 User Manual

1-14 MC3000 Integrator Guide

Main Battery Removal

Before removing the main battery, press the red Power button to turn off the screen and set the mobile computer to suspend mode.
To remove the main battery:
1. Rotate the latches to the open position.
2. Pull the strap to lift the Strap/Door Assembly off, bottom first.
3. Release the battery clip (at the top of the battery) and lift the battery out top first.
Latches
The SD card holder is located under the battery. To install the SD card, see
Strap/Door
Assembly
Battery
Battery Clip
Figure 1-8. Main Battery Removal
Secure Device Card on page 2-17.