Table of Contents
Advertisement
STEP 1:
1.
Open the box and put mainframe on the floor;
2.
With both hands holding the computer (18), rotate the uprights (4L/4R) so it is aligned with
the arch pocket on mainframe (2) as shown by the arrow
3.
Use the round head hex bolt (62) and washer (76) to secure the uprights (4L/R) to the
mainframe (2)
4.
Use the cross head self tapping bolt (72) to secure the cover (22) to the mainframe (2)
5.
Pull up (4L/4R), as shown by the arrow, and rotate until it is aligned with the arch pockets
on uprights (4L/4R).
TRACTION-R
7
Hide quick links:
Advertisement
Table of Contents
