DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS CONTENTS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. 1. Introduction ...........6 Please keep the following in mind as you unpack and install this 2. Applications ...........6 equipment: 3.
Page 4
1. INTRODUCTION 6. OPERATION CONTROLS AND FUNCTIONS The PU-DVI513L-KIT allows DVI signals to be transmitted over a Single CAT5e/6 cable to distances of up to 60m. 6.1 Transmitter Front and Rear Panels Designed with HDBaseT technology for greater flexibility in custom installations with full DVI signal transfer over a single CAT5e/6 cable.
7. CONNECTION DIAGRAM 6.2 Receiver Front and Rear Panels DC 5V CAT5e/6 IN DVI-D OUT PC or Laptop DVI Input DC 5V: Connect the 5V DC power supply into the unit and plug the Power adaptor to an AC outlet. Supply CAT5e/6 IN: Connect to the transmitter unit with a single CAT5e/6 cable for transmission of all data signals.
Need help?
Do you have a question about the PU-DVI513L-KIT and is the answer not in the manual?
Questions and answers