Table of Contents
Advertisement
Page 3
2 Installation
2.1 Install IP-CAM to Ethernet Network
The connection of digital video server is show below.
Please connect the PC and IP-CAMERA in accordance with the above picture.
The connection steps are shown as below:
Step 1: Connect the monitor, microphone and network to the device.
Step 2: Connect the power supply.
Step 3: Install the device.
2.2 Install CMS
After the CDD IP-CAM connected to the Ethernet, user can remote monitoring and
managing the device by using client software or IE browser. This chapter is the client
software, which is the quick install guide of the CMS, the operation and monitor setting
details please refers to CMS user manual in CD.
Note: Before to install control center software in user's computer, please make sure
all anti-virus software in the computer closed so that CMS can install correctly.
System requirement
Supported Operating System:
Operating system
Windows XP
Windows Vista
Window 7
Windows 2003
Windows 2000
Computer hardware requirement
Please make sure the software running well and the computer is compatible ：
Recommended PC Specification – 4 channels
IP CAMERA USER MUANUAL
Figure 2-1 Connection
Windows XP SP2 or most updated patch; Direct 9.0c or above
Windows Vista; Direct 10. c
Window 7 Ultimate
Windows 2003 serve or Directx 9.0c or above
Windows 2000 SP4 or Directx 9.0c or above
Comments
Advertisement
Table of Contents
