Table of Contents
Advertisement
Page 24
If "Show icons for networked UPnP devices" can‟t display in the "Network Tasks" list
box, please follow the below operation:
Click "Tools"-- "Folder options"
Check the "Show common tasks in folders" in the "Tasks" check box, UPnP icon
will display.
5.4.9 Mail Setting
Enter into "Network Configuration" "Mail Setting" interface. Please refer to Fig
5-19.
1. From Email: sender‟s e-mail address
2. User name and password: sender‟s user name and password
3. Server address: SMTP name of sender
4.Select the secure connection type at the Secure Connection pull down list according to
user‟ actual needs
5. Receival email address list: add email address into the list
6. Receival email address: receiver‟s e-mail address
7. After all parameters setup, user can click "Test your account settings". If email sent
successful, a "Test Successful" window will pop up, if not, users can try other email
addresses or check the setting.
Notice: If user change the static IP into PPPoE and select mailbox, there will be an
e-mail sent to users‟ mail box for notify a new IP address.
5.4.10 FTP
Enter into Network ConfigurationFTP interface; please refer to Fig 5-20:
IP CAMERA USER MUANUAL
Fig 5-19 Mail Setting
Advertisement
Table of Contents
