Table of Contents
Advertisement
Page 19
2. Check "transit enable". Then save the setting.
3. Input www.upnpicp.com in IE address; download and install Active X. Then a window
shows up as Fig 5-13:
4. Input the only device ID of the IP-CAM or user-defined name. And then input user
name and password.
Note: The default user name and password are "admin" and "123456"
respectively.
5.4.4 Server Configuration
Enter into "Network Configuration" "Server Config". Please refer to Fig 5-14:
IP CAMERA USER MUANUAL
Fig 5-12 Transit
Fig 5-13 Login
Fig 5-14 Server Configuration
Advertisement
Table of Contents
