Table of Contents
Advertisement
Page 6
For example, the network segment of this computer is 192.168.13.x under the local
config table. So, please modify the IP address, Gateway of IP-Cam which must be in the
same network segment with the computer. Modifying the network, you have to input the
password and click "OK" button to save the setting.
Note: The default user name is: admin. The default password is: 123456.
The new IP address of this device will display as follows after modification.
Step 3: Use the IP-Tool to login the IP-Cam.
Right-click the IP address and select "browse with IE" or double click the information
of this device. The IE browser will auto download the Active X control. If the IE
browser cannot download the Active X control, please refer to Q4 of Chapter 9. After
the completion of the installation of the Active X control, a login window will pop up.
Input User name and password and then click "OK" button to login.
Note: You can also use the modified IP address of the IP-Cam. Input the IP address in
the IE browser bar and then click "Enter" to access IP-Cam. The default user name is
admin. The default password is 123456.
IP CAMERA USER MUANUAL
Advertisement
Table of Contents
