Table of Contents
Advertisement
Page 27
Note: The default super administrator cannot be deleted.
Parameter
User Name
User Type
Binding MAC address
Password
Confirm Password
5.5.2
Onvif Configuration
This function is mainly used for connecting our device through other companies‟
monitoring platform software, such as, Hikvision, Axxon, Milestone., etc.
5.5.3
Security Configuration
Enter into Advanced ConfigurationSecurity Configuration to see a tab shown in Fig
5-26:
Check "Enable IP address" check box, select "Deny the following IP address", input IP
address in the IP address list box and click "Add" button. Then this IP address will
display in the list box; the operation step of "Allow the following IP address" is the
same with "Deny the following IP address"
Select the IP address which needs to be deleted from the IP address list box and click
"delete" button to delete that IP address.
Check "Enable MAC address" check box, select "Deny the following IP address", input
MAC address in the MAC address list box and click "Add" button. Then this MAC
address will display in the list box; the operation step of "Allow the following MAC
address" is the same with "Deny the following IP address".
4. Select the MAC address which needs to be deleted from the MAC address list box
and click "delete" button to delete that MAC address.
5. Click "save" button to save the above setting.
IP CAMERA USER MUANUAL
User name to operate the logon client end
Type of users, normal user, advanced user and super administrator
The MAC addresses of user access the server which should setup
according to actual MAC address of server.
Password to log in the client terminal
Password to log in the client terminal
Fig 5-25 Onvif Config
Meaning
Advertisement
Table of Contents
