Table of Contents
Advertisement
Page 16
IP CAMERA USER MUANUAL
Fig 5-7 Motion Detection Area
5.3.2 Motion Detection Trigger
1. Enter into "Alarm Configuration" "Motion Detection Trigger" to display a
interface as shown in Fig 5-8:
2. Check "Enable alarm" check box. Then all functions under this interface will be
activated.
4. Trigger Email: Check "Attach picture" and select email addresses in the "Receival
email address" text box(Email address shall be set first in the Mail config
interface).Then the triggered snap pictures will be sent into those address. User also can
define the subject and content of the email.
5. Trigger FTP: Check "Uploading picture". Then the triggered snap pictures will be
sent into FTP server address.
Note: Please refer to FTP configuration chapter for more details.
6. Press the "Save" button to save the settings.
Fig 5-8 Motion Alarm Trigger
Advertisement
Table of Contents
