Lock / Unlock Keypad; Set Alarm On / Off; Silence Alarm; Set Beep Tone On / Off - Oregon Scientific SE836 User Manual

Heart rate monitor with speed and distance plus pc connection
Table of Contents

Advertisement

LOCK / UNLOCK KEYPAD

Press and hold
/
for 2 seconds to lock or unlock
keypad.
indicates keypad is locked.

SET ALARM ON / OFF

1. In Time Mode, press SET.
2. Press ST/LAP/+ to turn alarm On or Off.
the alarm is turned On.
3. Press MODE or SET to exit.

SILENCE ALARM

Press any button to stop the alarm and it will activate
again 24 hours later.
OR
Set the alarm to Off.

SET BEEP TONE ON / OFF

In Time Mode, press ST/LAP/+.
is turned Off.

REPLACE BATTERY

If the battery power of your watch or chest belt is low, the
watch will display:
indicates
indicates the beep tone
2
watch low battery
To replace watch battery:
1.
Use a small screwdriver to open the battery
compartment lid.
2.
Remove the old battery and insert a new CR2032, 3V
lithium battery.
3.
Secure the lid by screwing it back into place.
chestbelt low battery
or

Advertisement

Table of Contents
loading

Table of Contents