Keypad Lock; Water Resistance - Oregon Scientific SE331 User Manual

. Use a coin to open the battery compartment lid by
turning it anticlockwise.
2. Remove the old battery and insert a new CR2032, 3V
lithium battery.
3. Secure the lid by turning the coin clockwise.
To replace the chest belt battery:
. Use a coin to open the battery compartment lid by
turning it anticlockwise.
2. Remove the old battery and insert a new CR2032, 3V
lithium battery.
3. Secure the lid by turning the coin clockwise.
iMPORTANT
Remember to set the profiles after every
battery replacement or reset.

KEYPAD LOCK

Press and hold EL/LOCK to lock or unlock keypad.
indicates keypad is locked.

WATER RESiSTANCE

The SE33 is water-resistant up to 50 meters (64 feet)
RAIN SHOWER-
SPLA- ING
SHES (WARM/
ETC COOL
WATER
ONLY)
50M
/ 64 OK OK
FT
•
Ensure the buttons and battery compartment are secured
and intact before exposing the watch to excessive
water.
•
Avoid pressing the buttons while in the water or during
heavy rainstorms, as this may cause water to enter the
watch, leading to malfunction.
NOTE
Even if both the watch and the chest belt are
water resistant, as radio signals do not carry in water, signal
transmission between the watch and chest belt will still be
impossible in water.
3
LIGHT SHALLOW SNORKEL-
SWIM- DIVING / ING/ DEEP
MING/ SURFING/ WATER
SHALLOW WATER DIVING
WATER SPORTS
OK OK NO