Jigsaw Safety Warnings - Ozito OZJS400A Instruction Manual

! !
SAFETY INSTRUCTIONS FOR JIGSAWS
1. Hold power tool by insulated gripping surfaces when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord. Cutting accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an electric shock.
2. Remove all nails in the work piece before the jigsaw. Cutting nails may damage
your tool.
3. Do not cut hollow pipe with the jigsaw
4. Do not cut material thicker or of a wider diameter than the specified limits.
5. Always allow enough clearance underneath the work piece to ensure the blade
does not touch the floor or work bench, etc.
6. Hold the tool at a comfortable distance from your body. Do not over reach to
access the work piece.
7. Do not touch moving parts with your fingers or hand.
8. Do not cut through walls or cavities without first checking for hidden electrical wires.
9. Ensure that you have tightened the blade prior to starting the machine.
10. When you have finished the cut, wait until the saw blade has stopped moving
prior to removing it from the work piece.
11. Do not touch the saw blade immediately after use. Allow time for the blade to
cool, as it may burn you due to the heat generated during sawing.
12. Always check accessories to ensure that they are suitable for the operating
speeds of this tool.
13. Incorrect accessories can break apart at high speed and cause serious damage
or injury.
6