Page 1
2000W Instruction Manual 3 Year Replacement Warranty OZHG2000WAK WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
GENERAL SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool" in all of the warnings refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool.
Page 6
GENERAL SAFETY INSTRUCTIONS (CONT.) d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
ADDITIONAL SAFETY INSTRUCTION FOR HEATGUNS WARNING! A fire may result if the appliance is not used with care, therefore: - be careful when using the appliance in places where there are combustible materials - do not apply to the same place for a long time - do not use in the presence of an explosive atmosphere - be aware that heat may be conducted to combustible materials that are out of sight...
Page 8
OPERATION (cont.) • Removing paint/dissolving adhesives Soften the paint using hot air and remove evenly with the scraper. Do not heat the paint for too long since this will burn the paint, making it more difficult to remove. Many adhesives (e.g. stickers) become softer when heated, allowing adhesive bonds to be separated and superfluous adhesive to be removed.
Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. CONTENTS 1 x Heat Gun OZHG2000WAK 1 x Fish Tail Nozzle 1 x Cone Nozzle 1 x Scraper...
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. • Failure to perform maintenance as set out within the instruction manual. • If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175...