Hardware Overview
BEC 5200S
The Front LEDs
The Rear Ports
Attention: BEC 5200S has not supported the ON/OFF switch
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/telephone
network
Lit when
Lit when
connected to an
power is ON
Ethernet device
Lit when the
system is ready
Connect your
computer to a LAN
port, using the
included Ethernet
cable
Press it to reset
the device or
restore to factory
default settings
BEC 5200 Series (802.11g) ADSL2+ Router
Lit steady when
there is a PPPoA
/ PPPoE
Lit when successfully
connected to an ADSL
DSLAM connection.
Connect the
supplied power
adapter to this
jack
Power
ON/OFF
switch
3