Joyner JNSZ800MV Owner's Manual page 24

FIGURE 24
3. Remove upper steel cushions and lower steel cushion. (See Fig. 26-27)
372-100203
FIGURE 26
4.Insert a spine-shaft into the hole of the Clutch assy , remove the six bolts on the Clutch
pressure plate, now It's clear. Caution: When fix the six bolts in the Clutch pressure plate;
you must tighten them according to the prescribed torque 28 N.M. (See Fig. 28-32)
FIGURE 28
S11-170010
Spline-shaft
FIGURE 25
FIGURE 27
FIGURE 29
24