D-Link DPH-850S User Manual page 93

DTMF mode
RFC protocol edition
RFC privacy edition
Transport protocol
Ban anonymous call
Enable strict proxy
Enable subscribe
Enable via rport
Enable prack
Enable uri convert
Enable DNS SRV
Enable display name
quote
Enable CLIR
Use stun
Stun Server
Stun port
Backup server
Set DTMF mode, there are four types:
 DTMF_RELAY
 DTMF_RFC2833
 DTMF_SIP_INFO
 DTMF_AUTO
Different server vendors can provide different
models.
Configure the protocol version of the phone. When
your phone needs to communicate with gateway
which uses SIP1.0, such as CISCO5300, you need
to configure to RFC2543 to
conduct normal communication. RFC3261 is used
by default.
Configure whether to use anonymous security call.
It supports RFC3323 and RFC3325.
Configure the transport protocol, TCP or UDP.
Configure whether to ban anonymous call.
Compatible with special server. (Using source
address of opposite side when return message, no
longer use the address in via field).
After successful registration, you can subscribe to
information, such as someone else's status or voice
mail and so on.
Configure whether to support RFC3581, rport
mechanism is used in internal network, and
requires a SIP server to support, it is used for
keeping the NAT connect of the internal network
and the external network.
Configure whether to support SIP-PRACK
function (used by "Color Ring Back Tone")
Recommend ： Use the default configuration.
When you send URI it will convert # to %23.
Configure whether to support RFC2782 protocol
edition.
Set to make quotation mark to display name as the
phone sends out signal, in order to be compatible
with server.
Enable/Disable CLIR.
Enable/Disable SIP STUN;
Configure the SIP STUN server address.
Configure the SIP STUN server port.
Configure a backup server address. When the
92